vicTron system

This Victron Product benefits from a 5 year warranty

Victron Quattro 24/8000/200-100/100 230V VE.Bus is also a combined inverter and charger. Additionally it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple system integration features such as three or split phase operation and parallel operation.

Two AC Inputs & two AC Outputs

The Quattro can be connected to two independent AC sources, for example shore-side power and a generator, or two generators. The Quattro will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.

Unique PowerAssist feature

The Quattro will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.

Virtually unlimited power thanks to parallel operation

Up to 6 Quattros can operate in parallel to achieve higher power output. Three phase or split phase operation is also possible. Please check our datasheets to see which models have paralleling, three phase and split phase capabilities.

Remote Monitoring and Control

Monitor and control your Quattro and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your Quattro to setting a Geofence for hire vehicles and more…

Victron Lynx Distributor (M8)

Victron Lynx Distributor a modular DC bus bar, with locations for four DC fuses. It will monitor the status of each fuse, and indicate its condition with a LED on the front. Part of the modular Lynx distribution system.A modular DC bus bar, with locations for four DC fuses. It will monitor the status of each fuse, and indicate its condition with a LED on the front. Part of the modular Lynx distribution system.

The Victron Lynx Smart BMS 500 is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature rich and complete option. Its main features are:

Built-in 500A contactor, used as a fall-back safety mechanism and also available as a remote controllable main systems switch.

Battery monitor, indicating state of charge percentage and more data.

Pre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell.

Bluetooth for use with our VictronConnect App, for setup and monitoring.

Local and remote monitoring using a Victron GX device, for example the Cerbo GX.

The Lynx Smart BMS is part of the modular Lynx Distribution system.

Victron Orion-Tr Smart 24/24-17A (400W) Non-isolated DC-DC charger  the Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive  3-stage charger with built-in Bluetooth.

For use in dual battery systems in vehicles or on boats where the  alternator and the start battery are used to charge the service battery.  The unit can be monitored and programmed via Bluetooth and can be  remotely controlled via a remote on/off switch.

The Orion Tr-Smart charger can be used in 12V or 24V systems and is  suitable for both lead acid and lithium batteries. Models are available  up to 400W and unlimited multiple units can be connected in parallel to  increase output power.

Suitable for high temperatures up to 55°C with a full rated output up to 40°C.

Remote on/off


Victron Orion-Tr 24/12-30A (360W) Isolated DC-DC Converter.  The remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).Adjustable output voltage: can also be used as a battery charger
For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.

All models are short circuit proof and can be paralleled to increase output current. An unlimited number of units can be connected in parallel.

IP43 protection
When installed with the screw terminals oriented downwards.

Screw terminals
No special tools needed for installation.

Input fuse
On 12V and 24V input models only.

Victron SmartSolar MPPT 250/70-MC4 VE.Can, A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

Panels and system monitoring

Victron Cerbo GX this all-new communication-centre allows you to always have perfect control over your system from wherever you are and maximises its performance.  Simply connect through the Victron Remote Management (VRM) portal, or access directly, using the separate GX Touch 50, a MFD or our VictronConnect app thanks to its added Bluetooth capability. This latest addition to the GX-range combines all the best of connectivity, redefining smart power solutions in every way.

Perfect monitoring and control

Instantly monitor the battery state of charge, power consumption, power harvest from PV, generator, and mains, or check tank levels and temperature measurements.  Easily control the shore power input current limit, (auto)start/stop generator(s) or change any setting to optimise the system.  Follow up on alerts, perform diagnostic checks and resolve challenges remotely.  The Cerbo GX turns any power challenge into an effortless experience.

Maximise your system performance

The Cerbo GX maximises the performance of your systems components in real-time and keeps them in perfect tune.  With its Dual Core Processor and the addition of an extra CAN-bus port you can now support even bigger systems; closely follow managed (lithium) batteries while the second port can support up to 25 simultaneously connected VE.Can solar chargers.  The new NMEA 2000-out support has the GX easily integrated into any boats network.  Four tank- and four temperature ports as well as 3 VE.Direct ports, 3 USB ports, 4 digital inputs and 2 relays allow you to expand control to a new level.  Maximising systems performance was never this easy.

Expand your view

The new (optional) GX Touch 50 display allows you to have an instant overview of your system and adjust settings in the blink of an eye. Its super slim 5 inch waterproof design, top-mountable setup and its simple installation bring a lot of flexibility when creating a crisp and clean dashboard.

Simple mounting and configuration

The Cerbo GX is now optimised to more than meet the standards of installer professionals.  The device is easily mountable on a DIN-Rail (with DIN35 adapter small, not included) and its separate touchscreen can now be bolted on top of a dashboard, eliminating the need to create perfect cut-outs (like with the Color Control GX) and is connected through just one cable, taking away the hassle of having to bring many wires to a dashboard.  Its new Bluetooth feature enables a quick connection and configuration via our VictronConnect app.

Outsmart any power challenge

The Cerbo GX serves endless purposes, extending perfect control to the most diverse applications.  For solutions including generators, such as Marine, or Backup & Off-grid, it will auto-start/stop your generator, or delays ignition until the end of ‘quiet’ periods. For Energy Storage Systems it keeps backup batteries at 100%, kicks-in during power-cuts and diverts excess (solar) power to self-consumption, saving you money.  For RV and Emergency vehicles it keeps vital systems function flawlessly. But that’s just to name a few…

The Victron GX Touch 70 Wall Mount accessory allows  easy mounting of the GX Touch on a solid wall. No drilling or cut-out is  required, other than the three screws that fix the wall mount onto the  wall.

The JA Solar 405w Solar Panel is a powerful, high efficiency panel. Its  all black design is an attractive option. These panels are made by JA  Solar, a tier 1 manufacturer who produces high quality, reliable solar  products.  the half-cell configuration of the module offers the  advantages of the higher power output, better temperature-dependent  performance,  reduced shading effect on the energy generation, lower  risk of hot spot, as well as enhanced tolerance for mechanical loading.  These panels also have the added benefit of 12 year product warranty and a 25 year linear output warranty.